What are Driving Blind Spots and How to Mitigate Them?

What are Driving Blind Spots and How to Mitigate Them?
Driving is an essential skill that requires awareness, concentration, and practice. One of the most critical aspects of safe driving is understanding and managing blind spots. Blind spots are areas around your vehicle that are not visible through the mirrors, and they can pose significant risks if not properly addressed. 

In this article, we will delve into what blind spots are, why they are dangerous, and how to effectively mitigate them during affordable driving lessons in Brisbane or elsewhere.

What Are Blind Spots?

Blind spots are areas around your vehicle that you cannot see while using your rearview and side mirrors. These areas vary in size and location depending on the type of vehicle you’re driving. Generally, the blind spots are located just behind the driver’s side and the passenger side of the vehicle, outside the view of the side mirrors.

In some vehicles, especially larger ones like trucks or SUVs, blind spots can be more prominent, covering a larger area. Drivers must be aware of these blind spots to avoid accidents when changing lanes, merging onto highways, or turning. Common blind spot areas include:

  • Rear Corners of the Vehicle: These are the most typical blind spots, usually on either side of the car, slightly behind and to the side.
  • Front Pillars: The “A-pillars” (the frame supports on either side of the windshield) can also block your view, especially when turning or approaching intersections.
  • Behind the Vehicle: While this is not usually considered a traditional blind spot, drivers of taller vehicles or vehicles without a rearview camera may have difficulty seeing directly behind them.

Why Are Blind Spots Dangerous?

Blind spots can cause severe accidents if a driver is not aware of them or fails to check them properly. For example, when a driver changes lanes without checking their blind spot, they may collide with another vehicle that they cannot see. Motorcycles and cyclists are particularly vulnerable because they are smaller and may easily fall into these blind spots unnoticed.

The risks posed by blind spots are heightened in congested areas like Brisbane, where frequent lane changes are necessary, and drivers are often surrounded by other vehicles. Addressing this issue is a vital part of any driving lesson to ensure new drivers are prepared for real-world conditions.

How to Mitigate Blind Spots?

There are several strategies you can use to reduce the dangers associated with blind spots. With proper techniques and consistent practice, you can effectively manage blind spots and significantly lower the risk of accidents.

Proper Mirror Adjustment

Many drivers unknowingly set their mirrors incorrectly, which can increase the size of their blind spots. Here’s how to adjust your mirrors to reduce blind spots:

  • Side Mirrors: Lean your head to the left until it almost touches the driver’s side window. Adjust the mirror until you can just see the side of your car. Then, lean to the right (centre of the car) and adjust the passenger-side mirror similarly. This adjustment widens your field of view and reduces blind spots.
  • Rearview Mirror: Adjust this so that it gives you a clear, centred view of the traffic behind you.

While this will not eliminate blind spots entirely, it will significantly reduce the area that is not visible through your mirrors.

The Head Check (Shoulder Check)

Even with well-adjusted mirrors, you must perform a head check (or shoulder check) when changing lanes. This involves briefly turning your head to the left or right to visually check the area outside your car’s field of view. This quick glance helps ensure no vehicle is hiding in your blind spot before making any lane changes.

In Brisbane’s busy streets, performing regular head checks can prevent dangerous situations, especially when dealing with motorcyclists or cyclists who may not always be easy to spot.

Use Technology: Blind Spot Detection Systems

Many modern cars come equipped with advanced technology, such as Blind Spot Monitoring (BSM) or Lane Departure Warning (LDW) systems. These systems alert you when a vehicle is in your blind spot, providing an additional layer of protection. While this technology is helpful, it should not replace manual checks. Instead, use these systems as a complement to proper driving habits.

Be Aware of Other Vehicles’ Blind Spots

It’s not only important to manage your own blind spots, but also to be mindful of the blind spots of other vehicles around you. Large trucks, buses, and vans have considerably larger blind spots than smaller vehicles. When driving near such vehicles, avoid lingering in their blind spots and give them plenty of room to maneuver. If you cannot see the truck’s mirrors, the driver likely cannot see you either.

Positioning Your Vehicle Safely

Positioning your vehicle in a lane where you are most visible to others is another way to avoid blind spot accidents. Stay in the centre of your lane and avoid driving too closely alongside other cars. If you find yourself in another driver’s blind spot, speed up or slow down to ensure they can see you clearly.

Conclusion

Understanding blind spots and learning how to mitigate them is essential for all drivers, whether you’re just starting out or have years of experience. In bustling cities like Brisbane, where traffic is dense and drivers often need to navigate complex roadways, mastering these skills is even more crucial. 

By adjusting your mirrors correctly, performing regular head checks, utilising modern technology, and being mindful of other driver’s blind spots, you can significantly reduce the risk of accidents and ensure safer driving for yourself and others on the road.

Safe driving starts with awareness, and understanding your blind spots is a critical step in becoming a confident, responsible driver. If you are looking for the best driving school in Brisbane, you can rely on No Yelling Driving School. For more information, visit the site here: https://noyelling.com.au/